Liquid Chromatographic Resolution of Racemic α-Hydroxycarboxylic Acids on Ligand Exchange Chiral Stationary Phases

Two ligand exchange chiral stationary phases (CSPs) based on (S)-leucinol derivative, sodium N-((S)-1-hydroxymethyl-3-methylbutyl)-N-undecylaminoacetate, and (R)-phenylglycinol derivative, sodium N-((R)-2-hydroxy-1-phenylethyl)-N-undecylaminoacetate, covalently bonded to silica gel have been successfully applied in the resolution of nine -hydroxycarboxylic acids. The latter was more effective than the former, the separation factors () being 1.05 to 2.12 while the resolution factors (R_S) varying from 0.18 to 5.29 on the latter. The chromatographic resolution behaviors were dependent on the type and the content of organic modifier and the content of CuSO₄ in aqueous mobile phase and the column temperature. A possible chiral recognition mechanism was also proposed based on the chromatographic resolution behaviors.     

CFD evaluation of drop retraction methods for the measurement of interfacial tension of surfactant-laden drops

Drop retraction methods are popular means of measuring the interfacial tension between immiscible polymers. Experiments show that two different drop retraction methods, imbedded fiber retraction (IFR) and deformed drop retraction (DDR), give inconsistent results when a surfactant is present on the surface of the drop. These inconsistencies are deemed to be due to dilution of the surfactant and due to gradients in interfacial concentration of surfactant along the drop surface. This physical picture is quantified for the simple case of a Newtonian drop in a Newtonian matrix, with an insoluble, nondiffusive surfactant at the interface. The drop is deformed in computational fluid dynamics simulations by shearing the matrix, and then allowed to retract. Dilution and interfacial tension gradients effects are found to be especially large at the early stages of retraction, making IFR unsuitable for measuring the interfacial tension of surfactant-laden interfaces. The effects of surfactant dilution and gradients are found to persist even at late stages of retraction, causing the DDR method to underestimate the equilibrium interfacial tension significantly. The largest underestimates occur when the drop viscosity is lower than the matrix viscosity.     

Kinetically controlled Ag+-coordinated chiral supramolecular polymerization accompanying a helical inversion

We report kinetically controlled chiral supramolecular polymerization based on ligand–metal complex with a 3 : 2 (L : Ag⁺) stoichiometry accompanying a helical inversion in water. A new family of bipyridine-based ligands (d-L1, l-L1, d-L2, and d-L3) possessing hydrazine and d- or l-alanine moieties at the alkyl chain groups has been designed and synthesized. Interestingly, upon addition of AgNO₃ (0.5–1.3 equiv.) to the d-L1 solution, it generated the aggregate I composed of the d-L1AgNO₃ complex (d-L1 : Ag⁺ = 1 : 1) as the kinetic product with a spherical structure. Then, aggregate I (nanoparticle) was transformed into the aggregate II (supramolecular polymer) based on the (d-L1)₃Ag₂(NO₃)₂ complex as the thermodynamic product with a fiber structure, which led to the helical inversion from the left-handed (M-type) to the right-handed (P-type) helicity accompanying CD amplification. In contrast, the spherical aggregate I (nanoparticle) composed of the d-L1AgNO₃ complex with the left-handed (M-type) helicity formed in the presence of 2.0 equiv. of AgNO₃ and was not additionally changed, which indicated that it was the thermodynamic product. The chiral supramolecular polymer based on (d-L1)₃Ag₂(NO₃)₂ was produced via a nucleation–elongation mechanism with a cooperative pathway. In thermodynamic study, the standard ΔG° and ΔH_e values for the aggregates I and II were calculated using the van''t Hoff plot. The enhanced ΔG° value of the aggregate II compared to that of the formation of aggregate I confirms that aggregate II was thermodynamically more stable. In the kinetic study, the influence of concentration of AgNO₃ confirmed the initial formation of the aggregate I (nanoparticle), which then evolved to the aggregate II (supramolecular polymer). Thus, the concentration of the (d-L1)₃Ag₂(NO₃)₂ complex in the initial state plays a critical role in generating aggregate II (supramolecular polymer). In particular, NO₃⁻ acts as a critical linker and accelerator in the transformation from the aggregate I to the aggregate II. This is the first example of a system for a kinetically controlled chiral supramolecular polymer that is formed via multiple steps with coordination structural change.

The nanoparticles were transformed into the supramolecular polymer as the thermodynamic product, involving a helical inversion from left-handed to right-handed helicity.     

NBS-Promoted reactions of symmetrically hindered methylphenols via p-benzoquinone methide

Symmetrically hindered methylphenols 1 react smoothly with NBS to form transient intermediates, p-benzoquinone methides (BM), which can be further processed to give hydroxybenzaldehydes in the presence of DMSO. This reaction is initiated by the formation of the phenoxy radical, followed by disproportionation to afford BM. None of the side-chain-brominated product is observed. The existence of BM is supported by the following observations: the formation of BM in solution can be monitored by GC and GC-MS; the electrophilic methine part participates in electrophilic aromatic substitution with anisoles to give hydroxybenzylated products 15; and the double bond character of the exocyclic methine plays a role in [4 + 2] cycloaddition with diene to afford Diels-Alder adducts. In contrast, unsymmetrically hindered or simple methylphenol (p-cresol) with NBS gives the nuclear brominated products, as usual. The energies of symmetrically hindered BMs, unsymmetrically hindered BM, and simple BM were calculated using density functional theories. Relative stabilization energies calculated at the B3LYP/6-31G//B3LYP/6-31G level by an isodesmic equation are enhanced 3-6 kcal/mol for symmetrically hindered BMs.     

Adsorption geometry of 4-picoline chemisorbed on the Cu(110) surface: a study of forces controlling molecular self-assembly

The adsorption of 4-picoline (4-methylpyridine) on the Cu(110) surface has been studied with time-of-flight electron stimulated desorption ion angular distribution (TOF-ESDIAD) and other methods. Using deuterium labeling in the methyl group and hydrogen labeling on the aromatic ring, it has been possible to separately monitor by TOF-ESDIAD the C-D bond directions and the C-H bond directions in the adsorbed molecule. These triangulation measurements have led to a detailed understanding of the conformation of the adsorbed molecule relative to the Cu(110) crystal lattice, allowing one to witness changes in the molecular conformation as adsorbate-adsorbate interactional effects take place for increasing coverages. At low coverages, the molecule adsorbs by the N atom at an atop Cu site with the aromatic ring parallel to the <001> azimuth and with the molecular axis inclined 33 (+/- 5) degrees along the <001> azimuth. As rows of 4-picoline molecules form long range ordered chain structures oriented along the <112> azimuth, the aromatic ring twists 29 degrees about the inclined molecular axis as a result of forces between the adsorbate molecules. The initial tilting of the molecular axis at low coverage is likely due to the interaction of the positive-outward dipole with its image in the substrate. The ring twist may result from dipoleminus signdipole forces between the adsorbate molecules in the rows formed tending to form nested parallel pyridine rings. These studies are the first to apply the TOF-ESDIAD method for the measurement of the direction of chemical bonds at more than one molecular location within an adsorbed molecule and the new method is named electron stimulated desorption-molecular triangulation (ESD-MT). The results obtained give information of importance in understanding the factors which control conformational effects during the molecular self-assembly of complex adsorbed molecules on surfaces.     

Liquid-liquid-liquid microextraction of aromatic amines from water samples combined with high-performance liquid chromatography

A simple preconcentration and clean-up liquid-liquid-liquid microextraction of aromatic amines is described in this paper. The compounds were extracted from 2.0 ml aqueous samples (donor phase) into an organic phase, layered on the donor phase, and then back extracted to a microdrop of aqueous receiving phase, suspended in the organic phase. After extraction, the microdrop was injected into the HPLC system directly for analysis. Optimal conditions of the extraction were donor phase (a1): 2 ml of water sample adjusted to pH 13 with NaOH-NaCl; organic phase (o), 150 microl ethyl acetate; and receiving phase (a2) of 2 microl aqueous solution at pH 2.1. The a1-->o extraction time was 15 min and for o-->a2, 30 s. 18-Crown-6 ether, which can complex with amine, was added to the aqueous receiving phase to improve the extraction performance. Enrichment factors ranged from 218 (for 4-nitroaniline) to 378 (for 4-chloro-2-aniline). The calibration curve for these anilines was linear within the range 2.5 ng/ml-2.5 microg/ml (r2=0.998). Detection limits ranged from 0.85 to 1.80 ng/mi (at S/N=3). This procedure can be a selective preconcentration method for aromatic amines present in water samples.     

Picryl derivatives of 5-nitro-2,4-dihydro-3H-1,2,4-triazol-3-one

Treatment of 5-nitro-2,4-dihydro-3H-1,2,4-triazol-3-one ( 1 ) with picryl fluoride (PkF) in 1-methyl-2-pyrrolidinone (NMP) gave a mixture of a monopicryl and a dipicryl derivative of 1 in a ratio of 2 :1 , respectively, regardless of the initial concentrations of 1 and PkF. The products were identified as 5-nitro-2-picryl-2,4-dihydro-3H-1,2,4-triazol-3-one ( 2 ) by X-ray crystallography and 5-nitro-2,4-dipicryl-2,4-dihydro-3H-1,2,4-triazol-3-one ( 4 ) by ¹⁵N labeling experiments.     

Calculation of Vertical Ionization Potentials of Oxygen Difluoride,Difluoramine, and Difluoromethane by Local Density Approximation

The vertical ionization potentials of OF₂, HNF₂, and CH₂F₂ were computed by the deMon density functional program. The results are compared with earlier calculations and with experiment. The average absolute deviation of the 21 computed ionization potentials of the outer valence electrons from experiment is 0.44 eV, which compares well with 0.37 eV for frozen-orbital configuration-interaction calculations. Although this performance is not as good as perturbation corrections to Koopmans' theorem, the computation requirements are much less demanding.     

Stereoselectivity of macrocyclic ring-closing olefin metathesis

[reaction: see text] Macrocyclic ring-closing olefin metathesis using ruthenium catalyst 3 was performed to produce a 14-membered lactone. The E/Z ratio of lactone was high regardless of the R group (auxiliary) or the initial alkene stereochemistry. A kinetic study demonstrates that the high E/Z ratio is due to secondary metathesis reactions that isomerize the product to the thermodynamic E/Z ratio.     

Metabolism of eupatilin in rats using liquid chromatography/electrospray mass spectrometry

Eupatilin (5,7-dihydroxy-3',4',6-trimethoxy flavone) is an active ingredient of an ethanol extract of Artemisia asiatica (DA-9601) that is used in the treatment of gastritis. In vitro and in vivo metabolism of eupatilin in the rats has been studied by LC-electrospray mass spectrometry. Rat liver microsomal incubation of eupatilin in the presence of NADPH and UDPGA resulted in the formation of four metabolites (M1-M4). M1, M2, M3 and M4 were tentatively identified as 3'- or 4'-O-demethyl-eupatilin glucuronide, eupatilin glucuronide, 6-O-demethyleupatilin and 3'- or 4'-O-demethyl-eupatilin, respectively. Those metabolites from in vitro study were also characterized in bile, plasma or urine samples after an intravenous administration of eupatilin to rats. In rat bile, plasma and urine samples, eupatilin glucuronide (M2) was a major metabolite, whereas M3, M4 and M4 glucuronide (M1) were the minor metabolites.